English
welcome

Suede Bowknot Ring

Product Details

What you’ll need:

•scissors

•4 strips of suede: A) 0.7 x 4cm, B) 0.9 x 7 cm (adjust the length to fit your finger), C) 0.5 x 10 cm, D) 0.8 c 10 cm

•double-sided tapes

Instructions:

1) Apply double-sided tape on the wrong side of C, and stick it along the right side of D.

2) Apply a small piece of double-sided tape at about 1cm above the end of C, then stick the opposite end (again, about 1cm from the bottom) to make a loop.

3) Turn it around, and apply a small piece of double-sided tape at the back as pictured.

   

4) Stick the centre of the loop.

5) Apply double-sided tape on the end of A, and wrap it tightly around the middle of the bow. Gather the bow at the centre as you wrap A around, so that the bow becomes more 3-D. Trim the excess if needed.

   

6) Apply double-sided tape on the end of B, and make a loop.

7) Apply double-sided tape on the back of the bow, and attach it to the ring. And yes, you’re done!

 

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.