English
welcome

Silver Sparkle Charm Bracelet

Product Details

You will need:

11 x 6mm light gold Czech glass pearls

11 x 6mm matt silver Czech glass pearls

9 x 6mm crystal AB Czech glass fire polished beads

8 x 6mm gold-lined crystal Czech glass fire polished beads

3 x silver plated Tierracast Christmas charms

3 x brass oxide Tierracast Christmas charms

1 x 17x21mm silver plated sunburst Tierracast toggle

31 x copper id 6.7mm, 1.02mm jump rings (rd6-40cpr)

31 x jewelers brass id 6.7mm, 1.02mm jump rings (rd6-40jbrs)

31 x bright aluminium id 6.5mm, 1.02mm jump rings (rd6-40bral)

4 x bright aluminium id 3.2mm, 1.29mm jump rings (rd2-50bral)

45 x 4.5x6mm silver plated oval jump rings

0.8mm silver palted wire or 39 2.5cm or 5cm silver plated headpins

Tools:

two pairs of smooth jawed chain nose or flat nose pliers, round nose pliers and cutters.

1. Make a one-in-one chain with the copper jump rings to the required length.

2. At one end of the copper chain, link one brass ring through the second copper link. Weave the brass ring under the first copper ring of the chain before closing. This is a mobius weave.

3. Following the path of the second copper ring, link one brass ring through the mobius copper and brass rings and the third copper ring of the chain. Weave the brass ring under the second copper ring of the chain before closing.

4. Continue adding brass rings along the length of the copper chain in a mobius weave, as in step 3.

5. Following the path of the brass rings, repeat steps 2-4 with bright aluminium rings (id 6.5mm). Make sure you weave the bright aluminium rings underneath the copper and brass rings before closing.

6. Attach the charms at equal intervals along the chain using one oval ring for each charm.

7. At one end of a length of 0.8mm wire, make a loop using the very tip of your round nose pliers. Thread one 6mm bead and make a wrapped loop. Repeat until you have made beaded dangles using all the 6mm beads.

8. Using oval jump rings, attach the 6mm beaded dangles along the length of your chain.

9. Attach the toggle ring to one end of the chain with one bright aluminium ring, id 3.2mm.

10. Link the toggle bar to the other end of the chain with three bright aluminium rings, id 3.2mm.

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.