English
welcome

Picture Frames - Using Diamond Glaze

Product Details

Step 1

Find a picture or design for the frame.

Step 2

Move the template over the image until you have found the desired picture.

Step 3

Use a pencil to trace the template over the image.

Step 4

Cut out the image with an art knife.

Step 5

Apply a thin coat of an adhesive to the picture frame.

Step 6

Lay the image into the picture frame. Use the Jewel Setter for easy application.

Step 7

Press the image into the frame making sure that all of the edges are laying flat. Use the other end of the Jewel Setter or your finger.

Step 8

Let the glue set for a few minutes.

Step 9

Before applying the Diamond Glaze, squeeze a little bit onto a scrap piece of paper to release air bubbles.

Step 10

Fill the picture frame with Diamond Glaze. Completely cover the image in the frame going all the way to the edge of the frame. Do not over fill the frame with glaze.

Step 11

If bubbles do appear in the glaze, use a small needle or paint brush to pop the bubbles. The bubbles will be harder to pop once the glaze starts to set.

Step 12

Let the glaze set for 2-3 hours on an even surface. Congratulations! You have created a unique picture frame piece to use in your jewelry designs.

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.