English
welcome

Modern Hues Bracelet Project

Product Details

1) Take the 10" length of beading wire and thread on one of the Crimp Tubes and bar half of the Toggle Clasp. Take the wire around and back down through the Crimp Tube. Pull so that the crimp cinches close to the connector loop of the Toggle Clasp. Crimp the tube shut with your Crimping Pliers and cut the excess wire tail off with your Side Cutters. Use the first indent of your Crimping Pliers to close a Crimp Cover over the crimped tube.

2) Thread two of the Round Brass Beads onto the wire. The pattern for this bracelet is: both Raspberry Square Beads, both Rust Square Beads, both Potting Soil Square Beads, and both Mustang Square Beads with a Round Brass Bead inbetween each of these.

3) Thread the last Round Brass Bead onto the wire, followed by the last Crimp Tube and the circle half of the Toggle Clasp. Take the wire around and back down through the Crimp Tube and the last Round Brass Bead. Pull so that the Crimp Tube cinches close to the loop on the Toggle Clasp. Crimp the tube shut with your Crimping Pliers and cut the excess wire tail with your Side Cutters.
4) Use the first indent of your Crimping Pliers to close the last Crimp Cover over the crimped tube. Done!!

Quantity of Items Needed
2 Crimp Cover 4mm Antique Brass Plated
10 Bead 6mm Antique Brass Plated
1 Toggle Clasp 12mm Base Metal Antique Brass Plated
2 Crimp Tube 2x2mm Seamless Antique Brass Plated
10" Length of Beadalon Wire .015" 30ft Black 7 Strand

2 Dyed Wood Pyramid Squares Potting Soil 15mm
2 Dyed Wood Pyramid Squares Rust 15mm
2 Dyed Wood Pyramid Squares Raspberry 15mm
2 Dyed Wood Pyramid Squares Mustang 15mm

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.