Midnight Heart Bracelet Project

Product Details

1) Pull about 2M worth of nymo thread and thread on one seed bead, leaving a 6" tail. Take the thread through the seed bead again, creating a stop bead. Thread on five more seed beads and then go back through the "stop" bead again and then again through all of the seed beads to secure them in place. Go through the "stop" bead one last time and then begin your peyote stitching in the round. Continue until the length of beadweaving is 6-1/2" to 7-1/2" long depending on what size bracelet you need to create. After finishing the first end, fit your needle back onto the 6" tail from the beginning and finish of this end of the bracelet as well.

2) On your Memory Wire spool, cut a loop free that has a 1-1/2" spacing from point to point (in other words, you don't want a complete loop of memory wire, more like a cuff)

3) Snake the memory wire "cuff" through the center of the beadweaving and then place a small amount of tape around one end so that the weaving doesn't fall off as your working with the other end of the bracelet.

4) With one end of the bracelet taped, thread a bead cap onto the other side. With your Round Nose Pliers, make about a 3mm loop with your Round Nose Pliers. Slide the bead cap and the rest of the weaving up against this finished side of the bracelet while you end off the other, taped, end of the bracelet the same way as you did the first side.

5) With the jump rings, make two chains of three jump rings each. Attach each length to either loop on the bracelet, and then attach one half of the toggle clasp to each half of this.

6) Pick up the head pin and thread on one seed bead, the hand painted heart bead and another seed bead onto it. Make a simple loop with the remaining head pin wire and then cut off the excess with your Side Cutters. Re-open the loop slightly and attach it to the middle jump ring on either side of the bracelet.

Quantity of Items Needed
1 Memory Wire Bright Bracelet
2 Bead End 3x6mm Silver Plated
6 Jump Ring - Open 6.5mm Silver Color
1 Head Pin with 2mm Ball 2" 22 gauge Silver Plated
1 Hand Painted Glass Bead Heart 20mm Blue
1 Toggle Clasp - 13x18mm Pewter Silver Plated
1 Nymo Nylon Thread Black
3 Tubes of Miyuki Round Rocaille Seed Bead 8/0 Opaque Black AB

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.