Evil Eye Bracelet

Product Details

What you will need:

•minimum one meter of knotting cord

•squared link gold chain



•jump rings

•a closure

•evil eye charm 


1. Measure the length of bracelet you want and cut two equal pieces of gold chain.


2. Start by taping down one end of the knotting cord (this will help with weaving the cord through the chain links without the cord fraying) and insert through the top end of the chain.

3. Pull the knotting cord through from right to left to a desired length so that you have enough slack to string through the rest of the chain.

4. Take the end of the knotting cord (the end with the tape edge), go over from this time top left to right wrapping the knotting cord around the chain and insert the end through the next link down.

5. From the image you will see the wrap woven pattern you are creating. Continue doing this until you reach the mid point on the chain (count the links to ensure you are even).

6. Once you've reach the mid point, loop the knotting cord through the charm and working the same way as you have, weave the knotting cord to the next link by wrapping it from right to left and through.

7. Continue wrapping the knotting cord around the chain until you reach the end from the mid-point.

8. Repeat the same steps above on the next chain. This time you are securing the two chain together via the charm.

9. Once you've completed both sides, tie the ends of the knotting cords together several times.

10. Using a jump ring and pliers, attach the two chains together at the mid-point between the charm and the tied end.

11. Snip the excess knotting cord off both ends.

12. Attach the chain ends by securing one end with a closure and the other end with a jump ring.

Here you have it!

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.