English
welcome

Creating a Laced Bezel Pendant

Product Details

Step 1

You will need paper, a glass dome and a corresponding bezel and corresponding bezel lace as well as glue. You will also need a paint brush, scissors and a pencil.

Step 2

Use the glass dome as a template and choose the area you wish to cut out.

Step 3

Trace the glass dome with a pencil.

Step 4

Cut out the image on the traced line.

Step 5

Paint a thin layer of glue onto the back of the glass dome using a paint brush.

Step 6

Carefully apply the back of the glass dome to the image. Apply pressure to remove any air bubbles. Set aside to dry for 5 to 10 minutes.

Step 7

Apply a thin layer of glue to the front inside surface of the bezel using a paint brush.

Step 8

Add the bezel lace to the glued area. Apply pressure to secure the lace. Let the glue dry for 5 to 10 minutes.

Step 9

Apply a thin layer of glue to the inside of the bezel lace using the paint brush.

Step 10

Add the dome to the glued area, paper side down, press firmly and let dry for 5 to 10 minutes.

Step 11

Congratulations! You have created a laced bezel pendant!

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.