English
welcome

Blackrock

Product Details

Instructions.

1) Put equal amounts of each tube of epoxy onto a piece of paper, or very small disposable plastic container. With a toothpick or popcicle stick, mix the epoxy parts together until it starts to thicken slightly. Put a small amount onto the etched part of the bail. Affix the glued side of the bail onto the Donut. Allow it to set and cure for a couple of hours before picking up again.

2) Take about a 2 - 2½" length of wire from the spool. Make a wrapped loop on one side of the wire, thread on a 10mm Bead, and then make another wrapped loop with the remaining wire. Now take another 2 - 2½" length of wire from the spool. Make a wrapped loop on one side of the wire, making sure to attach the loop to one of the loops that you created at the beginning of this step. Thread on a pearl and then make a wrapped loop with the remaining wire. Continue to make wrapped loops; alternating between beads and pearls until you have two wrapped loop strands of twelve beads. (One end of the length will have an bead, the other end will stop with a pearl)

3) Take a 3 - 3½" length of wire from the spool and make a wrapped loop with one end, attaching this loop to the pearl end of one of the lengths of wrapped loop chain that you created in step #2. Thread on an bead, thread on the bail/pendant, and follow with another bead. Make a wrapped loop with the remaining wire, attaching this loop to the pearl end of the other wrapped loop chain that you created in the previous step.

To Finish.

4) Take another 2 - 2½" length of wire and make a wrapped loop with one end of the wire, attaching this to one of the ends of the wrapped loop chain that you made in step #2. Thread on an bead (yes, there are two beads next to each other at the ends of the necklace :) and make another wrapped loop with the remaining wire, attaching this to one of the Jump Rings on the "S" clasp. Repeat this step for the other side of the necklace. Open the part of the "S" clasp that points up slightly. Done!

You May Also Like

About us |  Contact us |  Term of us |  Attention & Care |  Discount Policy |  Return Policy |  Article Details |  How to Pay |  SiteMap

Milky Way Jewelry Ltd. Group: Gets.cn | Beads.us

Copyright © 2013 Milky Way Jewelry Ltd. All rights reserved.